How to get in touch with us:

Any questions? Get in touch!

You can reach us at: +49 89 6237-0

Energy and power plant technology

We turn major projects into successes. As experienced general contractor, we engineer and build quickly controllable power plants and combined heat and power generation plants on the basis of gas turbines, gas and steam turbines, engines and boilers for different areas of application with fuels such as biomass, gas, coal and oil.

There is no such thing as a power plant "off the shelf". One of our strengths is the ability to keep developing intelligent solutions that meet the challenges of our customers. We will provide you with the entire power plant from a single source. We engineer everything from the design to the implementation, procure all components and handle all aspects of the power plant to the turn-key commissioning with our own project management team. We optimally implement plants according to your needs – because we are not beholden to any supplier or process.

Heat and electricity from one source – flexible and environment-friendly.

No matter which fuel is used: Our plants are designed to be flexible and utilise the principle of combined heat and power generation, which achieves a high degree of efficiency by jointly generating power, heat and refrigeration. We also have comprehensive expertise in the latest processes, such as power-to-heat, thermal storage and concentrated solar power (CSP). We optimise efficiency and flexibility and, as a result, the profitability and environment-friendliness of power plants. We achieve this goal not just with newly constructed plants but also when modernising existing ones.

Our energy and power plant technology solutions

Innovative power plant designs

Flexibly into the future: We engineer and erect highly flexible power plants that make control energy and heat extraction available to municipal and commercial customers – as partial lots or turn-key ready.

Solar thermal power plants

Kraftanlagen München has its own process with an open volumetric receiver and air as the work medium. It is inexpensive, environment-friendly and, thanks to our storage technology, supplies power and heat from solar energy – highly flexible and on demand.

Electric boilers and thermals storage

Get the most out of it! State-of-the-art storage technologies improve the degree of efficiency and increase the flexibility of power plants. We engineer and implement solutions specifically tailored to your needs.

Piping systems

High pressure, medium/low pressure, main and auxiliary cooling water pipes, sophisticated materials and media – we know how to deal with pressure.

Gas and steam turbine power plants

Whether in an existing facility or when built from scratch, your project is in the right hands with us every step of the way. We are the right general contractor for you – from approval engineering to the plant's handover.

Biomass heating power plants

Use the energy from wood! Our biomass power plants and heating plants, which are fired with renewable fuels, provide CO₂-neutral power and heat regardless of the weather.

Waste incineration plant

Turn waste into power and heat! As specialist for water-steam cycles, we engineer and erect complete energy systems for you.

Order value (in €1,000) of the projects that were completed in the area of energy and power plant technology in the past five years.

Total electrical power performance (in kilowatt) of all plants and power plants for which KAM was tasked with the execution of plant construction or laying piping systems in the past 5 years.

Number of partner companies that were involved in the field of energy and power plant technology in the past 5 years.

Europe's most modern gas engine heating power plant with combined heat and power generation


August 2018
“First Fire” – A milestone in the construction of the K.I.E.L. coastal power plant: For the first time, a Jenbacher J920 FleXtra gas engine from GE will be required in the K.I.E.L coastal power plant at nominal speed. Learn here how a “First Fire” works.

As general contractor, Kraftanlagen München erected a state-of-the-art gas engine heating power plant with combined heat and power generation at the Kiel Fjord.

The location at the Baltic Sea requires extremely flexible technology: Due to the high share of wind power in the grid, the power plant has to be able to feed its entire output into the local grid in a very short period of time in order to balance the fluctuations of the power generated from wind and solar energy.

The power plant can be ramped up from zero to 190 MW within just five minutes – a feat made possible by 20 gas engines that can each be individually controlled. The plant also supplies up to 190 MW of district heating: It is either fed into the public district heating network of the city of Kiel or, if the heat network has low demand, it is stored temporarily in a storage module and available later. In that way, power and heat generation can be decoupled at different times. That allows the power to be generated when it is needed in the grid.  

Fact sheet

Customer
Stadtwerke Kiel

Order parameters
Gas engine heating power plant with 20 gas engines and combined heat and power generation

Total capacity
190 MW electric, 192 MW thermal

Overall efficiency
more than 90 %

Envisaged construction period
Autumn 2015 to November 2018


March 7th, 2018:

All 20 Jenbacher J920 FleXtra gas engines have arrived at the coastal power plant K.I.E.L. Representatives of Stadtwerke Kiel, Kraftanlagen München and GE are unveiling one of the 20 Jenbacher J920 FleXtra gas engines at the new K.I.E.L. coastal power plant.

Alfons Weber, head of the Energy and power plant technology segment

"The power plant is exemplary. Due to its controllability, it provides an answer to the challenges posed by the energy transition and, due to the high effectiveness of its combined heat and power generation, it is also part of the heat transition."

Thanks to its modular design, the power plant cannot only optimally compensate grid fluctuations but also supply the power for sale on the balancing energy market. If there is too much power in the grid, the power plant will store the excess electrical energy as heat. In times of fluctuating power generation and the current lack of power storage capacities, this power-to-heat technology is a flexible and necessary solution.

The power plant project, which is the only one of its kind in Europe, is future-oriented and exemplary for the successful implementation of the energy transition by using highly efficient combined heat and power generation.

 

 

 

Our energy and power plant technology reference projects

Your contact person

Richard Fürbeck


Ridlerstrasse 31c
80339 Munich

+49 89 6237-371

or please send us a message

ImprintData ProtectionGeneral Terms and ConditionsDownloads for Business Partners
The cookies on this website are only used for technical purposes. They do not contain personal user data, which means that no user data are analysed or tracked. data privacy statement.
Agree