In early 2007, Kraftanlagen Heidelberg was tasked with supplying and installing a pipe bend DN600 in the live steam pipe.
read more

In 1991, KNK II was shut down and has been in the process of being decommissioned since then. The goal is to completely dismantle the plant.
read more

The decommissioning of the Karlsruhe reprocessing plant has been in full swing since 1996 and Kraftanlagen Heidelberg has been involved from the start in this comprehensive shutdown, decommissioning…
read more

The Gösgen nuclear power plant (KKG) is blowing off a lot of steam toward the Cartaseta factory in Däniken. Hot steam, to be precise.
read more

Standard KTA 1403 on ageing management in nuclear power plants, which was developed based on proposed standard KTA2301, had to be applied and implemented in power reactors in operation in Germany. …
read more

Kernkraftwerk Gundremmingen GmbH (KGG) has been engaged in a comprehensive modernisation effort for years.
read more

The scope of the work included the 3D model and the analysis of the piping systems with the calculation program Rohr2 (Sigma) according to FDBR including the verification of the steel structure for…
read more

The decommissioning of the storage facility and evaporation system (LAVA) on the premises of the Karlsruhe reprocessing plant required the separation of the emission monitoring. For this purpose, a…
read more

The scope of work of Kraftanlagen Heidelberg GmbH included the detailed engineering and installation of circulated pumps as well as the corresponding valves and piping systems for the modification of…
read more

The task was to evaporate the large amount of waste water, which accumulated as a result of shut down and decommissioning operations, with a new process technology.
read more

During coolant cleaning TR01-TR04, used and radioactively contaminated ion exchange resin are accrued. Until they can be disposed, they are stored temporarily in resin waste containers. The…
read more

Due to a non-linear calculation, the effects of the load case design earthquake on the spraying unit line TH16 Z112/110 were supposed to be determined. The analysis was completed using the method of…
read more

Kraftanlagen Heidelberg GmbH carried out the new design and erection of the decontamination area with integration in the existing construction and plant areas of the Philippsburg nuclear power plant.
read more

Kraftanlagen Heidelberg was tasked with the design and fabrication of a plug for sealing the control rod drive enclosure tubes in the base calotte of the reactor pressure vessel (including proof of…
read more

Kraftanlagen Heidelberg was tasked with the design, calculation and fabrication of a fuel element coring rig for Block 2 of the Philippsburg nuclear power plant.
read more

The determining factors were the boundary conditions: the crane trolley has to drive with the crane bridge and an increased dose rate could be expected outside of the parking and waiting positions.…
read more

Since being switched off in 2011, the Philippsburg 1 boiling water reactor has been in the so-called post-operation mode. The post-operation phase ends as soon as the permission has been granted to…
read more

Framework agreement for the provision of radiation protection services during the power operation and dismantling of the Philippsburg, Neckarwestheim and Obrigheim nuclear power plants.
read more

As a result of a decision reached by the G7 and a German-Russian intergovernmental agreement, the German government-owned Energiewerke Nord (EWN), together with Russian's Kurchatov Institute, built a…
read more

Started back in 2009, the project based in Sichuan province involves the vitrification of highly radioactive legacy waste from a reprocessing plant near the city of Guangyuan, which has a population…
read more